浅海中船舶轴频电场建模方法

为了对浅海环境中的船舶轴频电场进行建模,以基本模拟单元——水平时谐电偶极子为例,根据惟一性原理结合边界条件求解赫兹矢量势。通过电磁场与赫兹矢量势的关系式,推导了其在浅海环境下在海水中产生的电磁场的计算公式。对水平直流电偶极子在三层介质下的电磁场分布进行了求解,对其在海水中产生电场的空间分布特性及通过特性进行了分析。在实验室中模拟浅海海洋环境和水平时谐电偶极子,将水平时谐电偶极子和直流电偶极子在轴频段的电场分布仿真结果与实际测量结果做对比。结果表明,时谐电偶极子实际电场分布与理论计算结果一致,证明了推导过程和所得解析表达式的正确性;水平直流电偶极子在对轴频电场的信号包络中进行求解时建模精度高,可替代水平时谐电偶极子的计算模型,且具有更高的工程实用性。     

Nonparametric estimation of some quantities of interest from renewal theory

In this paper, confidence intervals are given for two quantities of importance related to renewal processes. For each quantity, two confidence intervals are discussed. One confidence interval is given for general, all‐purpose use. Another confidence interval is given which is easier to compute, but not of general use. The case where data are subject to right censorship is also considered. Some numerical comparisons are made. © 2003 Wiley Periodicals, Inc. Naval Research Logistics 50: 638–649, 2003.     

大型稀疏线性代数迭代库在YH 机上的高效实现

本文讨论了大型稀疏线性代数方程组的迭代算法、加速方法、存贮技术及并行算法。结合向量机特点,采取有效程序优化措施,开发研制了标量和向量库程序。在ＹＨ系列机上试算结果表明：大型稀疏线性代数向量迭代库比标量迭代库速度有较大提高。当Ｎ≥１００时,在ＹＨ─１机上加速比约２～８;在ＹＨ─２机上约２～７;当迭代次数增加时,加速比提高更明显;库中共轭梯度（ＣＧ）加速方法能有效地加快收敛,可减少迭代次数一半以上。     

二代光点式坦克火控系统的校准操作

通过分析坦克射击准备误差因素的地位变化情况,得出了火控系统的校准误差是影响首发命中关键因素的结论。在此基础上,重点阐述了二代光点式坦克火控系统的校准操作程序和方法,以满足部队科技练兵的需要。     

二维矩阵卷积在向量处理器中的设计与实现

为了加快卷积神经网络模型的计算速度,便于大规模神经网络模型在嵌入式微处理器中的实现,以FT-matrix2000向量处理器体系结构为研究背景,通过对多核向量处理器体系结构的分析和对卷积神经网络算法的深入研究,提出将规模较小的卷积核数据置于标量存储体,尺寸较大的卷积矩阵置于向量存储体的数据布局方案。针对矩阵卷积中数据难以复用的问题,提出根据卷积核移动步长的不同动态可配置的混洗模式,通过对所取卷积矩阵元素进行不同的移位操作,进而大幅提高卷积矩阵数据的复用率。针对二维矩阵卷积由于存在数据相关性进而难以多核并行的问题,提出将卷积矩阵多核共享,卷积核矩阵多核独享的多核并行方案。设计了卷积核尺寸不变、卷积矩阵规模变化和卷积矩阵尺寸不变、卷积核规模变化的两种计算方式,并在主流CPU、GPU、TI6678、FT-matrix2000平台进行了性能对比与分析。实验结果表明:FT-matrix2000相比CPU最高可加速238倍,相比TI6678可加速21倍,相比GPU可加速663 805倍。     

一种对间歇采样转发干扰的识别新方法

间歇采样转发干扰是一种针对相干雷达的有效干扰样式,该类干扰的抑制技术研究需求迫切,而干扰识别历来是抗干扰流程中的关键环节,针对间歇采样转发干扰的识别问题,提出了一种基于关联维数的干扰识别方法。通过对3类间歇采样转发干扰信号进行傅里叶变换,挖掘信号频谱上的差异,提取频域关联维数作为干扰识别的特征参数,并利用支持向量机进行分类识别,为后续雷达系统采取针对性抗干扰措施提供重要的决策信息。仿真结果证明该方法具有较高的识别率。     

基于运载能力评估的固体运载火箭推力向量控制方案比较

从对运载能力影响角度开展固体运载火箭发动机推力向量控制系统比较分析研究。设计了三种采用不同发动机推力向量控制系统的多级固体运载火箭方案,将增广乘子法与共轭方向法相结合,对固体运载火箭上升段弹道进行了优化设计,给出运载能力评估结果。研究表明,起飞质量均为50 000kg,目标轨道均为300km太阳同步轨道时,采用栅格舵和侧喷流作为推力向量控制系统方案,比采用燃气舵和侧喷流作为推力向量控制系统方案,运载能力提高70kg,比各级固体发动机全部采用摆动喷管控制方案,运载能力提高115kg,为固体运载火箭总体方案论证提供理论依据。     

Models for production planning under power interruptions

We present a robust optimization model for production planning under the assumption that electricity supply is subject to uncertain interruptions caused by participation in interruptible load contracts (ILCs). The objective is to minimize the cost of electricity used for production while providing a robust production plan which ensures demand satisfaction under all possible interruption scenarios. The combinatorial size of the set of interruption scenarios makes this a challenging problem. Furthermore, we assume that no probabilistic information is known about the supply uncertainty: we only use the information given in the ILC to identify an uncertainty set that captures the possible scenarios. We construct a general robust framework to handle this uncertainty and present a heuristic to compute a good feasible solution of the robust model. We provide computational experiments on a real‐world example and compare the performance of an exact solver applied to the robust model with that of the heuristic procedure. Finally, we include the operational impact of interruptions such as “recovery modes” in the definition of the uncertainty set. © 2013 Wiley Periodicals, Inc. Naval Research Logistics, 2013     

The incentive effect of acceptance sampling plans in a supply chain with endogenous product quality

This article studies a firm that procures a product from a supplier. The quality of each product unit is measured by a continuous variable that follows a normal distribution and is correlated within a batch. The firm conducts an inspection and pays the supplier only if the product batch passes the inspection. The inspection not only serves the purpose of preventing a bad batch from reaching customers but also offers the supplier an incentive to improve product quality. The firm determines the acceptance sampling plan, and the supplier determines the quality effort level in either a simultaneous game or a Stackelberg leadership game, in which both parties share inspection cost and recall loss caused by low product quality. In the simultaneous game, we identify the Nash equilibrium form, provide sufficient conditions that guarantee the existence of a pure strategy Nash equilibrium, and find parameter settings under which the decentralized and centralized supply chains achieve the same outcome. By numerical experiments, we show that the firm's acceptance sampling plan and the supplier's quality effort level are sensitive to both the recall loss sharing ratio and the game format (i.e., the precommitment assumption of the inspection policy). © 2013 Wiley Periodicals, Inc. Naval Research Logistics, 2013     

基于BPMN的作战视图辅助设计方法

体系结构设计在C4ISR系统开发中越来越受到重视.由于目前体系结构设计主要是依据DOD体系结构框架,体系结构产品是框架最基本的表现形式,因此,体系结构产品设计是体系结构设计中的一个关键问题.在深入研究BPMN的基础上,提出了基于BPMN的作战视图辅助设计方法,建立了企业过程图与作战视图产品OV5、OV6的转换关系.